The directional air outlet moves automatically to direct air flow to every corner of the room and keep it thoroughly cool.

The indoor unit is equipped with a DC inverter fan motor. The outdoor unit is also equipped with DC inverter technology compressor and fan motor. With 3 DC inverter motors the unit achieves maximum performance and energy efficiency.

Prevents evaporator from freezing and maintains dehumidifying effect under low temperature ambient.

After a potential power failure, the unit will automatically restart, keeping all previous settings.

The drain pump can remove the condensing water from the unit, up to 750mm high. The drainage piping is easy to install even at narrow spaces (*optional equipment).

In case of cooling fluid leakage, the unit automatically detects the leak and shuts operation down while at the same it alerts you with the corresponding malfunction code on the indoor unit screen.

In this mode priority is given to dehumidifying the air. To achieve dehumidification the unit operates at low fan speeds and low compressor speeds.

The can fully operate within the power range of 168 to 230V, while also being protected from any fluctuations that may occur within this range.

A ventilation motor can be installed in the fresh-air duct, connected to the ventilation connector, and work with the indoor fan to increase the volume of fresh air (optional).

The unit memorizes the desired mode and temperature so that you can have the desired operation at a touch of a button.

The remote control has a backlit LCD display for easy reading.

With the reserved ports, a remote switch can be easily connected for a remote control. The builtin PCB can produce alarm signal which can be connected to an external alarm light or vibration gauge.

Right after the AC is turned off, the indoor unit continues to operate for a few minutes in dehumidification mode, at Extra Low fan speed. This removes the moisture from the indoor evaporator to prevent the formation of mold and bad odors.

This mode saves energy and improves night time comfort. The set temperature will increase by 1°C per hour in cooling mode or decrease by 1°C per hour in heating mode, for the first 2 hours of operation. Thereafter the unit will retain the new temperature for 5 hours after which it will switch off automatically!

Allows you to start the unit at a preset time in the desired cooling or heating mode.

Turbo function will be helpful to cool or heat your room quickly and effectively.

The unit has wired control.

The manufacturer reserves the right to change the characteristics of the products, the elements and the images, without prior notice.